Clean and Care of your Vehicle Battery

Auto repair may appear like an enigmatic affair, especially when you never endeavored it, yet there are a couple of things that you can begin with are simple for anybody to ace. If you have the fundamental devices, there are several auto repairs you can do yourself. You need some basic instruments.....

Your car needs more care during winter!!!

Winter has come!!! The season is almost ready for taking test of your skiing capability as well as your vehicle mechanical ability!!! If you are not really well prepared or careful, you probably may find yourself slipping towards a guard rail.

Driving is stressful for you?? Just relax…Because Nissan has made your job easy!!!!

Future is going to be either very complicated or very exciting, as many of automobile companies are planning for presenting drive less vehicle now a days. Even, many countries are accepting this advancement of this automotive industry in very positive manner.

This is default featured slide 4 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 5 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

Search This Blog

Sunday, August 20, 2017

Know how your car clutch works with Parts Avatar Canada !!

How a car Clutch Work
What is a clutch?
A car clutch is a very simple device which is not exclusive to automobiles. It synchronizes two gears of different speeds in a smooth manner.
The role of clutch in vehicles is to connect and disconnect the transmission and the crankshaft.

What does it do?
Generally the clutch acts like a brake for the engine. This is the reason why improper shifting causes car to stall. The car clutch slows down the engine so that the wheels can catch up.
What are its parts?
  1. The Flywheel
This part of the clutch is attached to the crank and it moves with the engine.


  1. The clutch disc
It is located in between the flywheel and the pressure plate. Both of its sides have friction surfaces which are similar to the brake pad. It creates or breaks the contact with the metal flywheel and pressure plate surfaces. This allows smooth engagement and disengagement.


  1. The pressure plate
As soon as the clutch pedal is depressed, the pressure plate releases. Thus, allowing itself and the pressure wheel to spin independent of the disc. This prevents the torque from being transmitted from the engine to the gearbox. The pressure plate is normally made up of cast iron steel and it uses a diaphragm type spring to apply force against the disc once engaged, which is fastened to the assembly by a series of straps.


  1. Throw out Bearings
The throw out bearing sits against the pressure plate in either a push style or pull style arrangement that compresses the diaphragm and releases the disc when the clutch pedal is depressed. The disc would start spinning independent of the assembly when the diaphragm is released, once the force is applied.
The images shown below will show how the clutch works when engaged and disengaged.


Types of Clutch


There are two types of clutches. Check them out below:-
  1. Wet Clutch
In this clutch the entire assembly is fully immersed in engine oil and is lubricated by it. A little power loss can be attributed with this approach due to viscosity of the oil. But at the same time is improves the overall life of the clutch and reduces the sound.


  1. Dry Clutch
It is self explanatory that this clutch does not have anything between the whole mechanisms. It is better as there is no other material restricting the transfer of power. They are loud and create a rattling sound. The life span of this clutch is low as compared to the wet clutch.
What happens when you press the clutch pedal?
When the clutch is engaged, everything would spin as one unit. If you will press the clutch pedal in, the clutch assembly is disengaged. The shaft and the clutch both spin independently of the flywheel and pressure plate.
As soon as you will allow the clutch pedal out, the friction surfaces on both the sides of the clutch disc will begin to make contact with the metal surfaces of the flywheel and pressure plate, and the power of the engine is transferred with the help of transmission input shaft, with the help of gears and right down on the road.
The tricky part involved here is that you will have to match up the speed of the engine to the engagement of the friction surfaces. This is done so that you don’t get caught in the clutches of a potentially embarrassing engine stall.
If some of your car parts are damaged and you wish to buy brand new ones, then you must visit our aftermarket store- https://partsavatar.ca/.  We promise to provide you with the best quality of auto parts and other tools and accessories at economic prices.



Friday, August 18, 2017

Is your car clutch damaged? Want to get rid of the old one? Visit Parts Avatar Canada to buy a new one !!

Clutch Maintenance- How to Avoid Costly Repairs
You are aware that with the passage of time, all your car’s internal components will get damaged and then you will have to get them replaced or repaired as soon as possible.  You can extend the life of your car’s engine, transmission and more by treating your car with care and carrying out all its maintenance on regular basis.
Now today let us read about the most troublesome component in the cars- the clutch. The performance and the lifespan of your clutch would totally depend upon the way your drive and the amount of maintenance you perform on it.
How does the clutch work?
All the cars which are operated manually have a clutch. A torque convertor is used in the automatic vehicles instead of clutch, and it requires a different level of maintenance. Whenever you turn ON your car, your car’s engine would constantly rotate even if the car is on standstill. The friction between the engine and the transmission is controlled by the clutch. It makes sure that the car engine operates without its wheels turning.
There is a large friction disc in the clutch that comes in contact with the engine’s wheel. If you will not press down the clutch pedal, then the movement would travel from the flywheel to the friction disc of the clutch, and then later to the transmission.
The friction disc of the clutch would be pulled away from the flywheel, when you will press down on the clutch. This would allow your car’s engine to rotate without transferring power to the transmission and onwards to the wheels.
Now you know that the clutch plays an important role in the car’s operation, so it is really important to treat it carefully. If you will use it carefully, then you can extend its use by 20,000 miles. On the other hand if you will use it recklessly, then its effective use would be cut in half.
The Clutch’s Friction Disc
The car clutch has various components which are important for the normal functioning of your car. The most common source of problem of the clutch is the friction disc which is connected with the flywheel and can wear out with the passage of time.
The role of the friction disc is really very simple. It transfers power from the engine to the gearbox. Imagine a giant brake pad that would connect with your engine to provide the friction required to transfer energy from the flywheel to the transmission.
The friction disc would press against the flywheel when the clutch pedal is released. Through this the clutch and the engine would start rotating at equal speed. When the clutch pedal is pressed down, the clutch is pulled back and friction is released.
When the friction disc is in direct contact with the flywheel, then it would constantly come in and out and then would eventually lead to wear and tear. If the friction disc would get worn down, then the clutch would slip and would rotate at the same speed as the flywheel.
The overall performance of the car would decline as the clutch doesn’t rotate at the same speed as the engine. It would prevent it from even being able to drive on an incline. Clutch slippage is a major problem and it would increase the amount of friction between the clutch and the flywheel. The problem would increase if you will not get this auto part replaced on time.
How to reduce clutch wear
Your car clutch would only wear when it is being engaged or disengaged. Its wear would be minimal if it is spinning at the same speed as the flywheel. Similarly, when the clutch is fully disengaged, its friction disc won’t come in to contact with the flywheel at all.
This shows that all the wear that your car clutch undergoes happens while it’s engaging or disengaging with the engine. Some extra wear would be caused on the friction disc of the clutch if you will press the clutch pedal suddenly. So you must change the gears carefully so that your clutch isn’t suddenly pressed or pulled away from the flywheel.
It is really very important to change into first gear carefully as all the major wear occurs in this specific gear. Make it a point to keep your car’s engine spinning as slow as possible and then you can gently take the pressure off the clutch pedal to start moving.
Is your clutch in need of repair or replacement?
For many drivers, the problems related to car clutches are uncommon. The reason behind this is that most of the modern clutches are designed to tolerate more than 75,000 miles of driving without any hassles. Thus, making clutch repairs and replacements a fairly rare expense for drivers.


The most serious problem that can arise in your car clutch is slipping- this type of problem is really easy for you to identify. There are many other problems which can affect your car clutch and would thus reduce your car’s overall performance. If your car clutch stops performing as it should actually do, then you must buy replacement parts online or can even take your car to any local garage to have it checked by a professional.
If some of your car parts are damaged and you wish to buy brand new ones, then you must visit our aftermarket store- https://partsavatar.ca/.  We promise to provide you with the best quality of auto parts and other tools and accessories at economic prices.



Thursday, August 10, 2017

It is very important to use the parking brake whenever you park your car. Read this to know why.!!

Why you should always set the Parking Brake
Is there any need to use the parking brake every time you park your automobile, even if your car is automatic?  The answer to this question is yes! That’s why you should know everything about the car brake and the main reasons why you should always use it. The car brake is also known as emergency brake or handbrake.
What you need to know about the parking brake
The handbrake is a very vital auto part of your vehicle’s safety system. One should use it on a regular basis and not only when your automobile is parked on a hill. Parking brake is considered more important in a manual transmission vehicle and is given no importance in an automatic transmission vehicle.
When you will put your automatic transmission into park, then there is device known as parking pawl which would engage. It is a metal pin that would engage into a notch ring which is fully attached to the transmissions output shaft.
But the sad thing is that the parking pawls can break or can become dislodged. Commonly it doesn’t occur, but unfortunately if it does then your car would be rolling down the street.
On the other hand, if you will use the parking brake, then it would keep the vehicle in the exact place even if the parking pawl dislodges or breaks down. One has to operate a handbrake manually and it would put a stronger hold on the vehicle than just simply putting it into park.
Now when we are talking about the manual transmissions, the parking brake is essential. Your vehicle would not lock in the place if you will put the manual transmission into the gear. It would just make it much harder to move, but it can still roll away. So this is the reason why you should always use a parking brake whenever a manual transmission vehicle is parked.
How parking brakes work
The system of a parking brake is totally mechanical that bypasses the hydraulic braking system to stop the car in case of any emergency. It keeps your car in the exact place in which you have parked it.
The parking brake lever is attached to the steel cables and these cables tighten when the lever is pulled. Another lever is pulled that would compress the brake shoes to stop the vehicle or to hold in intact in its original place. In a disk brake system, when the parking brake lever is pulled, then the corkscrew device is engaged and it would push a piston into the brake pads stopping the vehicle.
There is a self locking mechanism in the parking brakes which is very helpful. It makes sure that the parking brake does not release until the lever or in some cases the parking brake pedal is released.
Keep in Mind
  • If your car gets hit while it is already parked, then your parking brake would provide stability to the automobile and would also prevent it from rolling down.
  • When your brake pedal is being depressed, then that is the best time to engage the parking brake. Do this before shifting it into the park and this would reduce the strain on the parking pawl.
  • There are cables situated under the car which can corrode and would get stuck in the place. To avoid this nasty situation, the parking brakes are used. This can even turn into a big problem as then you will not be able to use the brake and at the same time the cable will snap when you will try to engage it.
  • This point is really very important.  Make sure to disengage the parking brake before you start driving or else your entire braking system could get damaged due to one careless mistake.
Using the handbrake when parking up
When you are going for a driving test, then the examiner would surely ask you to park the car on the right or some other places many a times. Whenever you stop the car, make sure that you apply the handbrake and then put the car gear in neutral.
General driving and the handbrake
When you are going to give a driving test, then many occasions would arrive when you will have to stop your car. For example- when you are trapped in traffic, then you will have to stop your car or stopping the vehicle at the red light.
The person who is taking your test would expect you to use your handbrake whenever you stop the car in such situations, but keep this thing in mind that you need not desperately use it every time you stop the car. Just use in when it is required.
When you have stopped the car, then wait for some seconds and then if you are going to remain stationary for some time, then gently apply the handbrake. This would then eliminate the possibility of applying the handbrake too early.  If you have to move quickly, then there is no need to apply the handbrake.
If some of your car parts are damaged and you wish to buy brand new ones, then you must visit our aftermarket store- https://partsavatar.ca/.  We promise to provide you with the best quality of auto parts and other tools and accessories at economic prices.

Tuesday, August 8, 2017

There are various car lights to deal with, Parts Avatar would help you to know which ones you should use and when..!!



There are a number of car lights to deal with; how do I know which ones I should use and when?
If you want to pass a driving test, then you must be able to identify a car’s lights and how to use them. The main idea behind this is to ensure that the drivers use their car lights properly. But the sad fact is that many drivers forget this thing once they have cleared the test. They will put their own lives in danger and at the same time the other people who are driving on the road.
The car lights have a lot of functions and each light has its own specific function to help the driver to signal the other driver. If the lights are not used properly, then accidents can happen. This is the reason why it is really very important to recognize the different lamps and know when to use them.
The car lights include:
There are two types of headlights: Low beam headlights and high beam headlights. With the help of this light, the driver is able to see the roadway even in the dark and at the same time is able to give signal to the other car drivers that a car is present. It is advised that you should keep your headlight as low beam as it would provide adequate forward and lateral illumination without blinding other road users with excessive glare. There would be no particular control of glare if high beams are used and it should only be used when there are no visible cars in front of you.


Tail lights are used to produce red light at the rear of the vehicle and at the same time they are wired. They are lit whenever the headlights are on. With the help of these lights, the drivers behind you are able to recognize that you are ahead and would get to know that how far you are.
  1. Daytime running lights
These lights are located both at the front and the rear of the car. They are turned on automatically, while there are some cars which have option in which you can turn them off according to your wish. They are basically designed so that you become more visible to other vehicles, but there are some drivers who find it distracting in oncoming cars.
These lights are only used during the fog when the normal headlights are not at all effective. They are mounted low in order to prevent the light from refracting on the fog and glaring back towards the driver.
  1. Signal Lights
These lights are located on both front as well as back of the car beside the head and tail lights. They are also known as turn signals or blinkers. When you will activate this light, the other drivers would come to know that now you are about to turn and will most likely be slowing down to do so.
  1. Brake Lights
They are located on the side of your rear lights and they give a signal to the other drivers that you are slowing down or about to stop. You need not worry about misusing them as they are only activated when you apply the brakes. Make it a point to maintain them properly and do not burn out.




  1. Hazard Lights
These lights are also named as flashers and are situated in the front as well as back of the vehicle. When you will turn them on, it would provide a flashing signal to warn the other drivers that you are facing a problem and are in distress or you are warning of an immediate danger like rocks in the road or something else. It should just be used as a warning and never as a stop signal or illegal parking permit.


Decreasing Traffic Accidents through Enlightenment
Have you recently been injured due to dangerous misuse of driving lights? Want to buy perfect driving lights for your car? Then you must visit our aftermarket store- https://partsavatar.ca/.  We promise to provide you with the best quality of auto parts and other tools and accessories at economic prices.

Sunday, August 6, 2017

Irritated because of rust on auto parts? Parts Avatar would help you to prevent rust on your car !!



How to Prevent Rust on your Car
Rusting can be a very serious issue for your automobile. The damage caused by rust can ruin various auto parts and then you will also have to compromise with the strength as well as the rigidity of the vehicle’s frame. You must get rid of these issues by taking proper care of your vehicle’s exterior and taking a fast action when the signs of rust begin to appear. The best way to stop rusting to occur on your car is to prevent it from occurring in the first place.
Finding Rust Before it spreads
  1. Inspect your wheel wells and bumpers
The most common trouble spot for rusting in your car are the wheel wells. The people don’t focus on them clearly because they are dirty and difficult for them to see clearly. It is recommended that you should rotate your tires after every 6,000 miles. When you will remove the wheel and rotate it, then use a flashlight to check if there is any rust or not. Spray the area out if you find that there is too much dirt or mud in the wheel well while inspecting for the rust.




  1. Look for signs where body components meet.
If two pieces of metal would meet, then there are a lot of chances that your vehicle would rust. This would happen if there is potential for them to rub together. The main reason behind it is that rubbing would wear away the protection provided by the paint and then rust would be formed. Just walk around your automobile and have a look that where the components would meet such as in the door frame, hood meets the fender and the areas around the trunk. You can open the car doors while inspecting your vehicle for rust. If you find that your paint is being bubbled up, then it means that rust is developing beneath the bubbled up paint.


  1. Inspect the bottom of your vehicle regularly.
Most of the punishment is often taken by the underside of your car and that’s why it is most likely to rust. If you live in an area where it would snow in winters, then salt and other harmful chemicals would be accumulated forming rust beneath your car. You should always check your car during oil changes. Keep this thing in mind that you should never climb under your vehicle without using jack stands.




  1. Don’t allow water to sit in or on the vehicle.
Your car is painted properly, clear coats are made, and plastic trim pieces are all intended to protect the metal on your vehicle from rusting. But with the passage of time, these forms can lose their power and it would thus lead to rusting. If your car or truck leaks and gathers water around, then there must be drains that would allow the water to pour out. Consult your manual and then try to locate the drain holes if the water does not drain. Remove whatever is blocking out the way so that the water can drain out easily.


Washing your vehicle to prevent Rust
  1. Wash your vehicle regularly
The dirt alone cannot cause rust, but if the dirt and sediments would keep on collecting over time, then it wear your car paint whenever anyone would touch it. Another thing that could cause rusting is the gasoline spills while filling up the vehicle. So it is advised to wash your vehicle on a regular basis so that the sand as well as the dirt gets rubbed away. Make it a point to wash your vehicle as soon as possible if it comes in contact with paint.




  1. Wash the undercarriage of the vehicle
If the underside of your vehicle has salt and chemical deposits which are caused through snow, then it would definitely lead to rusting. Wash the underside of your vehicle time to time so that these materials don’t get accumulated for long. A lot of automatic car washes allow undercarriage cleaning.


  1. Use baking soda
You can always add some amount of baking soda to the soap and water with which you are going to wash the undercarriage and the wheel wells of your vehicle. Now you are ready to deal with the road salt. The scientific reason behind this is that baking soda would neutralize the acidic effect of the salt and other ice melting chemicals present on the roads. One tablespoon of baking soda is more than enough when you are thinking of cleaning the undercarriage of your vehicle.


If you are willing to change your car parts all by yourself and want to buy new ones, then all you have to do is to visit our online auto parts store - https://partsavatar.ca/. We care for our customers and that’s why we offer the best quality of products at affordable prices.