Showing posts with label brake pads. Show all posts
Showing posts with label brake pads. Show all posts
Wednesday, April 11, 2018
Don't put your safety on stake with bad brakes!! Buy Brake pads and rotors today at PartsAvatar Car Parts Online.
Brakes are
your car’s lifeline!! So, don’t mess with them.- Brought to you by PartsAvatar Auto Parts.
Auto parts maintenance is very important for to
achieve optimum performance out of your car. For that, you need to inspect your
car daily and make sure that you upgrade your car body parts and accessories such as headlights for better driveability.
When it comes to car brakes we have several issues
going on! Ever tried to address them? Do you know your ignorance could lead you
to life threatening situation for everyone on the road?
Suppose you are driving with hard brakes and in you
are stuck in a situation where you need to stop at zebra crossing lights but
you can apply brake! Anything weird can happen. So, make sure to not be a
killer on the road and maintain your car brake pads and other car brake
parts.
Make sure to be able to notice when the brakes of your
car need attention. For that, check out the following symptoms. If your car is
showing such symptoms, waste no time in getting to your mechanic and get the
job done ASAP.
Feeling
vibration and pulsation in the pedal?
Do you think your car’s brake pedal is vibrating
unusually? You can see it as a signal given by car brakes that they need to
visit mechanic. This is often accompanied with loss of pedal response.
The brake pedal should neither be too soft nor be too
hard. It means that when you press the brake pedal, it should operate firmly in
such a way that you don’t need to press the pedal in order to touch the floor
beneath it. If such situation occurs, it could be a red flag for you!
Vibrations are not a good thing to happen as it may
also hamper the working of steering. There should be pulsating sensation while
braking. Pulsating pedal may indicate to worn rotors. So, help yourself in
getting to the mechanic as soon as possible.
Annoying
noises??
That is really annoying. Noisy brakes commonly
represent worn brake pads. Replace brake pads and notice if the noise still
persists. If you are hearing something like screeching, grinding, squealing,
rubbing and other noises coming while braking, that means the brake pads and
brake rotors have probably gone bad.
Squealing sound could also be produced when the worn
pads wear down to the point where the wear sensors start making contact with
the rotor. Depending on the extent of the wear, the respective audible sound
could be heard.
Remedy? You will probably be asked to buy new brake
pads or rotors. After replacement, you will definitely notice the changes in
braking abilities.
Inappropriate
braking
“I have no brakes”, is it what you said when you could
not accomplish the task of braking? If you said so, perhaps you did not notice
it first when you were not able to firmly engage the brakes by firmly pressing
the brake pedal.
If you are pressing down farther than usual on your
brake pedal to stop your car, requiring more pressure and time to perform the
same stopping function, you have entered the first stage and sign of brake pad
wear.
When the brakes pads are excessively overheated, the
braking response reduces and overall safety and handling of your car come in
dangerous situation.
Get your car brakes inspected.
Illuminating
brake warning light
Did you ever notice that small illuminating light on
your car’s dashboard? Its actually brake warning light that is warning you of
the potential issues that you might face in regards to the brakes of your car.
Don’t ignore them.
Puddles of brake fluid which may look like clear
liquid with a brown or tan tint are sure signs of needed brake repairs and
unsafe braking system.
Pungent
smell
Smelly tires especially pungent ones are not safe to
drive on. They are probably the result of degraded car braking performance. In
that case you need to be extra careful and waste no time in getting car brakes
checked.
Car Brake
Maintenance Tips
Check out some tips to maintain car brakes. To ensure
that the braking system of your car is always in perfect condition, both brake
pads and brake discs need to be maintained in their best condition.
Never let the brake pads to wear excessively. You cant
be waiting for the brake pads to get completely destroyed due to this level of
wear. Replace brake pads and brake discs when you start noticing that the time
has come to replace them.
Overheating is also a sign of degrading brake pads.
Check the rate of wear of brake pads and make possible amendments.
If your car’s brake callipers have broken down, then
you must replace them. In this way you are actually helping your car preserve
the same level of safety and quality that it had before.
Failing to check or replace a worn component will
create more problems for other components too. So make sure to replace the
brake parts without any delay.
Now that you know how to maintain your brakes, don’t
forget to visit PartsAvatar Car Parts if you are in need of car brake parts
replacement. We offer shipping on auto parts shopping over $99, so enjoy your
shopping with PartsAvatar Today !!
Saturday, February 10, 2018
Buy Car Brake Parts and make yourself safe on road with brake pads maintenance at PartsAvatar Online Car Parts
For the safety of
yourself and your co passengers, don’t forget to upgrade car replacement parts
today!!
No one wants to get
into a situation where you want to stop somewhere and you apply brakes of your
car, but your car doesn’t stop! The rest you are intelligent enough to guess.
So, we all are so
ignorant about cars and so busy with our hectic schedules that we often forget
to take care of our beloved car. Car brakes don’t have prolonged life like any
other car part. So is with car brake rotors and brake pads. For better
performance of car braking system, we recommend to choose car brake rotors and car brake pads
from trusted manufacturers of brake parts like BeckArnley.
If you will browse
through PartsAvatar Car Parts’ online portal, you will find thousands of brake
parts of trusted reckoned brands with warranties attached to them. You won’t
run out of options at our comprehensive catalogue that’s for sure.
Paying attention to
components of braking system not only prolongs their life but also ensures a
safe ride on road. Let’s take a look at how to maintain car brake pads and
rotors and how to know when they need replacement.
Brakes are one of
the most pivotal safety features of our automobile which are used hundreds of
times per day which we don’t even realise. For the braking system to give
optimum performance and for the safety of the driver, it becomes very important
to know what car brake pads are capable of.
So, it becomes the
prime duty of car brake pads to provide the driver with an assurance of optimum
performance at all times so that the best results in terms of braking could be
achieved.
Car Brake Pads
If your car brake
pedal is pulsating or the brakes are not responding properly when triggered, it
means the time has come to upgrade car brake pads.
But what are car
brake pads? Car brake pads provide friction to achieve optimum braking results.
They are located in the brake callipers and function by pressing against the
disc brakes rotors with friction material to slow down and stop the wheels.
Due to friction
they wear out and need to be replaced timely. The brake pads that you can trust
should be the names of brand that you can trust, that you get stopping power,
give style and performance you demand.
New brake pads
require a specific “running in period” before they are able to achieve their
full power to brake. During this time, the surface of pad adapts to surface of
drums. When the optimum connection between friction pairs is successfully
established then maximum deceleration can be achieved during braking of your
car.
In order to maintain
a vehicle braking system, pay close attention to car brake pads’ condition.
Here are some symptoms that hint about damaged or worn car brake pads.
Brake Pad is thin
This is the thing
you can visually inspect. Look at the condition of car brake pads through
spokes of car wheel at the current brake pads. If they look totally worn, then
waste no time in getting them replaced.
Once you have
replaced car brake pads, you will notice the performance fluctuation yourself.
Squealing
Though brakes make
several noises to indicate that there time for replacement has come. Excessively
worn brake pads produce squealing noise because the brake pads have been worn
to such extent where sensor has come in contact with the rotor.
There are several
other sounds that indicate the same thing. But to get rid of squealing sound,
make sure to visit a trusted mechanic.
Screeching sound
Do you hear a loud
screeching noise when the brake pedal is fully pushed down? This sound is
produced by small metal shim surrounding the brake pads and they are actually a
warning signal to you telling to replace the brake pads for safer journey.
So get rid of this
unpleasant sound by replacing quality brake pads.
Clicking and grinding sound
Upon depression of
the car brakes, do you hear something rattling or clicking? If you hear so,
then make sure to replace worn brake pads with new ones to get rid of this
annoying sound.
Grinding sound is a
bad news indicator because grinding is usually caused by the brake disc and
brake calliper that have been rubbing together because of worn brake pad. So
here you might have to pay for the damage of calliper and disc along with brake
pad.
You can reduce the
possibility of paying more on replacement of expensive car parts by paying
attention to the condition of your car brake pads regularly.
Pulsating pedal
Gravely worn brake
pads often cause the brake pedal to pulsate when the car brakes are applied. A
pulsating pedal may also be indicative of a potential problem with the rotor
and there could be damage to brake pads too.
So go to a
professional and let him figure out.
Poor braking
This is the thing
that you will definitely notice when something bad is going on with your cars’
brake pads. Worn brake pads wont be able to provide that optimum braking
performance as they used to so you will see degraded braking of your car.
If your car is
pulling to one side of the road it might not always be the fault of your car’s
alignment. The secondary and important problem could be associated with brake
pads that demand immediate replacement.
If the vehicle is
pulling to one side without using the steering wheel when the car is braking,
this indicates that worn brake pads are meddling with the braking capabilities
of your car and you need to repair them immediately.
Now that you know
how important the maintenance of brake pad is to the car’s braking efficiency,
then don’t forget to check them and get them replaced for a safe ride.
If you are looking
for affordable car parts then look no further than PartsAvatar Car Parts as you
wont be running out of options that’s for sure!
Wednesday, July 12, 2017
Losing control of your car is a scary experience. Learn how to prevent and correct skidding in bad weather conditions @PartsAvatar Car parts.
7/12/2017 11:00:00 AM
auto body replacement parts., brake pads, car brake parts, steering and suspension system, tire tread
4 comments
Canadian winters
especially snow can turn a safe road into a slippery one. Don’t worry, Armed
with our knowledge and inexpensive Aftermarket auto parts, Parts avatar Canada
has all of your bases covered~ Care for your Car parts at partsavatar.ca !
Car skidding is very
dangerous and sometimes it can lead grave accidents in the road. You will
notice skidding generally happening on wet or slippery surfaces.
Bad weather conditions
like snow, rain or ice can turn a safe road into risky one. It can be a terrifying
experience for you when you feel that you have lost control of your car when it
skids out all of a sudden. While experiencing skidding if try many options like
slamming brakes, turning the wheels in opposite direction or staring at the
object we are about to hit, but unfortunately these measures are going to make
the impact of skid worse. As the least damage impact you will need to replace auto
steering system parts and car
brake parts as they become prematurely worn.
So what makes your car
skid? How to prevent it? How to steer out of skid? Read this article for your
safety on icy or wet roads and avoid skid with preventive measures suggested by
parts avatar.
Skid
and its types
Skidding happens when
your car loses traction from its wheels which can cause it to move
uncontrollably. Either front wheels or rear wheels can experience traction lose
in skid situation. In such situations, your tires may lose the control and grip
on the road and will start sliding uncontrollably.
Keep in mind that if
the tires don’t grip the ground it is like driving on the block of ice i.e. you
will keep on sliding here and there until you crash into other object. In such
situation, you will make things worse by applying brakes or tuning the wheel. In
turn you will end up ruining brake pads and will need to replace car’s brake pads.
There are different kinds of skid that you can face on slippery roads. Have a
look!
Under
steer or Front wheel traction lose
Under steer is caused
when your front car wheels lose traction while cornering. When you turn into a corner,
the front wheels slide sideways which means that the car travels forward rather
than turning. You car will slide away from the centre of the curve and possibly
hit the oncoming traffic. This is usually caused while taking a fast turn.
Under steer is the
easiest type of skid to handle and also it is least dangerous. It can be caused
either turning too fast into a corner or applying too much power as you exit
the corner. If you turn to the corner too fast, the weight of the car shifts
towards the sidewalls of the tires and it no longer provides gripping.
Over
Steer or Rear wheel traction lose
Over steer happens when
your car’s rear wheels lose traction while cornering. The wheels will slide
towards the outside of the curve. Your car’s front end will point either to the
left or the right of the intended path despite your steering input.
The front wheel begins
to turn but the back wheel spins out to the outside of the curve causing the
rear of the car to fishtail
or slide from side to side. It has further sub types as: power over steer and
lift off over steer.
Power over steer is
usually used in drifting to achieve big, Smokey power slides. Only rear wheels
can perform power slides. Lift off over steer is much pronounced in rear engine
mid size cars like Toyota MR2. The solid lump of metal at the rear acts like a
pendulum.
Hydroplaning
Hydroplaning or
aquaplaning is caused when your car’s tires rise up on the top of a layer of
water because the tread cannot disperse the water fast enough. Once this
happens, you will briefly lose steering ability because your tires are unable
to get any traction. This scenario happens when it is raining or snowing.
You will notice a small
jerk in the direction you are heading once your tires regain traction. The
shallower the tread on your tires the more likely you are to hydroplane.
Wheels
locking up
Slamming or stepping on
the car’s brakes too hard will cause the wheels to lock up. In such situations,
avoid driving too close to the vehicle in front of you.
If your car’s wheels
lock up, don’t accelerate further. Instead carefully steer the vehicle and
brake slowly. If the roads have thick sheet of ice on them, wheels can lock up
due to the tires attempting to grip the surface of the road.
What
to do?
There is no different
process of recovering from a skid for front and rear wheel drives.
Take
your feet off the pedal
Whenever you feel like
your car is skidding the first thing to do is to get your foot of the
accelerator. Do not press the brake pedal as it may make things worse. It is
useless to apply brakes in such situation and the acceleration is the root
cause for skidding.
To slow down the car
let your skidding tires gain some traction and they will eventually contribute
in slowing your car down. Do not panic and get your feet off the accelerator
and brake pedal.
Gentle
steering input
Always steer in the
direction you want the car to go. It is foolish to steer into the skid. While the car is skidding, look directly at
where you want to go not at the objects you want to avoid. For example if you
focus on a tree, your hands will follow your direction and that’s where you are
going to end up.
Whether your front or
rear wheels are skidding, correct direction to steer is inevitably in the
opposite direction that your front end is headed. So, once you know the
direction to steer, make sure to steer gently.
Re-
distribution of vehicle weight
As you begin to regain
the traction on wheels, you’ll want to gently apply the brakes or the
accelerator. Gentle braking is done to re distribute the weight to those wheels
which will help them gain even more traction. So, if your front wheels are
skidding, you will want to apply brakes gently and if the rear wheels are
experiencing a skid then you will find the need to gently apply the
accelerator.
So all in all,
depending on the type of skid (rear or front), apply brake or the accelerator gently.
Few
tips for preventing skids
There are easy
techniques that can keep you safe and prevent skid situation to happen.
1. Choose the speed
according to weather condition. It is advised to drive slowly on wet, icy or
snowy conditions. Fast driving often results in skidding.
2. Avoid phone calls
and other distracting chores while driving and keep your hands on the steering
and eyes focused on the road.
3. Maintain a proper
distance between you and the car ahead of you. This way you will have plenty of
space to react if something happens.
4. Decrease the car’s
speed while taking a turn – it will help you stay in control.
Using these techniques
will help to prevent skidding and gain control of the car. Be attentive, stay
calm and keep both hands on steering for a safe drive.
Partsvatar is the
leading dealer of aftermarket auto parts across Canada. Visit partsvatar
replacement auto parts for the best deal!
Tuesday, July 4, 2017
Do you use Parking brake everytime you park your car ?? PartsAvatar Explains everything you need to know about Parking Brakes!
7/04/2017 11:30:00 AM
automatic transmissions, brake pads, brake release cable, brake shoes, car brake parts, car parking brake
1 comment
How often do you use
Parking brakes of your car? Let’s discuss the importance of parking brakes in
this article – Parts avatar Auto brake parts
Why do we specifically
call parking brakes as parking one? This is because they are meant to be used
when you need to park your car. But the major question arises that how often do
we use parking brakes? The answer is most of use the parking brakes on the
hills or if your car’s transmission is manual. According to a research, about
82 percent of the vehicles with manual transmission use parking brake to park
their vehicle.
This methodology is
totally wrong. Whether you are in hilly or a flat area, using automatic or
manual transmission, you should use parking brakes every time you park your
car. Parking
brake has nothing to do with the transmission mode and
terrain.
Why
parking brakes?
The parking brake on a
car provides redundant safety feature that prevents unintended vehicle movement
due to user error or the failure of transmission system. Not applying the
parking brake means the driver solely relies on the transmission to hold the vehicle
after he parks.
Parking brakes are one
of the pivotal components of the car’s safety system. It is not only important
part of manual transmission but also plays important role in automatic
transmission. When a vehicle with automatic
transmission triggers parking mode, parking pawl inside the transmission
engages. Parking pawl engages into the notch ring that is attached to the
output shaft of the transmission. When the brakes are engaged, the pawl
restricts the transmission output shaft from turning.
If the parking pawl
breaks or become dislodged then there might be a problem of car rolling away.
This is the least case of hazard even though. But still we should take
precautions. The parking brake enables strong hold of your car than just
putting the car in “Parking” mode.
The steps to apply and
release the parking brakes are quite simple. Most parking brakes are hand
operated levers located in the center console. Steps to apply the parking
brakes are:
1. Put your foot on the
brake pedal.
2. Pull up on the
parking brake handle.
3. Lift the handle as
far as you can.
4. Put the car in park.
5. Take your foot off
the brake pedal.
6. Turn off the engine!
It is to be noted that
you should set the parking brake while your foot is still on the brake pedal,
before shifting to “park”. This reduces the strain on the parking pawl.
Depending on the vehicle
there are two ways to release the parking brake. In some cars, either the brake
pedal is pushed until you hear a “click” sound or brake lever is pulled which
is located near parking brake pedal. To release the parking brake:
1. Put your foot on the
brake pedal.
2. Crank the engine.
3. Press the release
button at the end of parking lever depending upon your vehicle while lifting up
slightly.
4. Lower the lever
completely. Make sure that the parking brake light disappears.
5. Put the car in gear.
Before driving away,
make sure to disengage the parking brake otherwise it will ruin your car parts
slowly. So make this a habit to apply the parking brakes when you park the car
and disengage the parking brake before you drive. This also ensures the long-lasting
life of your car’s
brake pads.
Symptoms
of a failing Parking brake and its parts
As a safety feature,
all cars and trucks are equipped with parking/emergency brakes. These brakes
are not only meant to park the car but also can be used in an emergency
situation. There are certain symptoms that sign towards malfunctioning parking
brakes. For the sake of your safety, pay attention to the following symptoms.
Parking
brake not engaging properly
It the very first
signal of a malfunctioning parking brake. If there is a problem occurring while
pulling or engaging the parking brakes, it means the parking brakes have gone
bad and you may not be able to engage them in emergency situations or to park
your car.
Parking
brake won’t release
Another symptom is
parking brake not disengaging properly. Parking brake may have issues while
disengaging if the lever gets stuck or jammed. It is not good for your vehicle
because if you start driving with parking brakes engaged, it will cause the
brakes to overheat and sustain damage.
Parking
brake shoes does not hold vehicle
If the parking brake
shoes become worn, they lose their tendency to hold and secure the weight of
the vehicle. It may cause the car to roll on inclined surfaces like hills which
is quite dangerous.
If the parking shoes
are severely worn, the end result will be a non operational parking brake. This
increases the risk of rolling and accidents on inclined surfaces. Parking brake
shoes of your car play an important role in parking brake control. Make a visit
to your mechanic and replace the car
parking brake shoes if they are worn.
Parking
brake cable malfunctioning
Parking cable in many
cars is used to activate the parking brake. A failing parking cable may result
in vehicle rolling down the surface or getting into a serious accident.
If the parking brake
cable becomes excessively worn it will not be able to pull the parking brakes
tightly. This may cause the vehicle to roll even if the brakes are engaged due
to loose gripping. Parking brake won’t be able to function if the cable breaks.
Another symptom of a
broken or worn out parking release cable is illuminating car's parking warning light switch. If the parking light switch is still
illuminating even after disengaging the parking brakes, it means that cable has
been stuck or the release process has not been performed properly.
If you suspect any
issue then get your parking brake cables replaced.
Parking
brake release cable fails to disengage the brakes
The parking brake
release cable’s main task is to disengage the parking brake. Make sure your car’s
parking brake release cable is in good condition otherwise
issues with disengaging of brakes effect the brake and transmission system
drastically.
If you are unable to disengage
the parking brakes, there are chances that the release cable has been broken.
Waste no time and get your car checked by technician immediately.
The parking brake
release cable corrodes over time. In cold temperature areas, the cable may
become frozen and fails to disengage the brakes when needed. It is wise to
first warm up your car before disengaging the brakes if it is freezing outside.
If you are driving your
car with the parking brakes still engaged, you are just ruining your vehicle’s
entire braking system yourself. Save yourself from unwanted repair bills.
Repair
parking brake
Parking brake repair is
also a part of car’s routine maintenance. You can easily maintain some of the
components of the parking brake system or at least could decrease your repair
bill.
Make
small adjustments
Check your car’s
service manual and make small adjustments like tightening the cable or removing
the additional slack.
Apply
lubricant
Lubricate the parking
brake system if they become sticky by time. If you have problem releasing the
brakes, sometimes the brakes might be demanding lubrication. Review entire
parking brake mechanisms for further lubrication by removing rear brakes if the
stickiness still persists.
Replace
worn cables
Carefully replace the
worn cable. A damaged cable results in malfunctioning parking brakes and
inability to stay on an inclined plane. There are chances of rolling of car if
the cable breaks. For your safety, without any delay, get them replace if
necessary.
So, with this guide,
you will get to know about another important safety feature of car.
Visit PartsAvatar
replacement auto parts with free shipping for best deal
in aftermarket auto parts across Canada.
Tuesday, April 25, 2017
Subscribe to:
Posts (Atom)