Clean and Care of your Vehicle Battery

Auto repair may appear like an enigmatic affair, especially when you never endeavored it, yet there are a couple of things that you can begin with are simple for anybody to ace. If you have the fundamental devices, there are several auto repairs you can do yourself. You need some basic instruments.....

Your car needs more care during winter!!!

Winter has come!!! The season is almost ready for taking test of your skiing capability as well as your vehicle mechanical ability!!! If you are not really well prepared or careful, you probably may find yourself slipping towards a guard rail.

Driving is stressful for you?? Just relax…Because Nissan has made your job easy!!!!

Future is going to be either very complicated or very exciting, as many of automobile companies are planning for presenting drive less vehicle now a days. Even, many countries are accepting this advancement of this automotive industry in very positive manner.

This is default featured slide 4 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 5 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

Search This Blog

Showing posts with label wrench. Show all posts
Showing posts with label wrench. Show all posts

Monday, October 23, 2017

Want a trunk light bulb? Parts Avatar is always there for you !

What is the Trunk Light Bulb all about?
An enclosed place where you can store all your important possessions is a trunk. This place is totally secured and natural light does not enter in this compartment. The light bulb that would provide light in the trunk is controlled by a switch. This switch is either mounted to the trunk lid or can also be located in the trunk’s latch. With the help of this light, all the contents would be visible to you so that you can insert or remove items conveniently.  The trunk blub would turn off immediately when you will close the trunk lid.

Keep in Mind
  1. If you are thinking of accessing the trunk through a rear seat pass, then that would not turn the trunk light on as it only turns on when the trunk is open.
  2. There is an override switch in the trunk light to switch it off. You can always check the override switch in the trunk to see if it hasn’t been accidently bumped or turned off.
  3. If the filament of the bulb is loose, then it would cause a problem. You can always replace the bulb to fix it.

What common symptoms indicate you may need to replace the Trunk Light Bulb?
  1. The trunk bulb doesn’t illuminate when the trunk is opened.
  2. The light of the trunk blub is dim.
How to replace a car trunk light bulb
The trunk light in the car trunks provides both convenience and safety. There can be any emergency during the night time, thus it is important to replace a bad bulb.
Have a look at the steps which would help you to change the light bulb in your vehicle’s trunk when you present bulb has failed. It would appear like a small system of your vehicle, but in reality it is a big deal. Just think what would you do if you get a flat tire on a road? In that situation you will have to access the spare, jack and a tire iron. All these things are generally located in the trunk or cargo area of your car.
PART 1- Removing the old trunk light bulb
Materials Needed
Step 1- Disconnect the battery
Disconnect the clamp holding the negative battery cable with the help of a socket wrench. It would protect you blowing the fuse. This first step is really very important and at the same time is a good habit to develop when you are dealing with any electrical auto part.
Step2- Locate the trunk light bulb
Now you have to open the trunk of your car. Find the handle on the driver’s side floorboard so that you can access the trunk or the cargo area. The light bulb is mounted on the underside of the car trunk door. Or it may be situated on the roof of the inside of the vehicle’s cargo area. You can always use a flashlight to find the light bulb.
Step 3- Remove the trunk light bulb housing
Gently get under the lip of the housing by using a screwdriver or you can also use your fingernail. Be calm and patient, one of its sides would start to come loose.
Just keep this thing in mind that the plastic tabs on the housing are sensitive and that’s why you must not break them. They are uncommonly serviced parts and thus would be very expensive to replace.
Step 4- Remove the old light bulb
The light bulb is placed inside the socket; use a fine pair of gloves to gently pull the light bulb out of it. Most of the people have no idea that if you will do this with bare fingers, then it would slip as your hands would be oily. You can also unintentionally squeeze the bulb too hard that its brakes. That’s the reason why it is advised that you wear gloves so that you don’t cut yourself.
PART2- Installing the new trunk light bulb
Step 1- Reinstall the light bulb and housing
Wear your gloves and then insert the light bulb into the socket. Generally there are two types of light bulbs used in this application. They are designed in such a way that they should be installed in either direction.
The first type of bulb is similar to a household bulb. You can install them with a simple push or with a push in and twist motion. The second type of bulb is cylindrical in shape and with the help of two clips.  
Now gently replace the housing into the vehicle and later press it back into place.
Step 2- Reconnect the battery and test the new bulb
Slide the negative battery terminal over the negative post. Then later tighten the terminal cable with the help of a socket wrench. Now your job is complete and all you have to do is to test your new bulb. Just walk around the vehicle and verify that the light has illuminated or not.
Now close the trunk and clean up your tools which you have used in this process and then you are finished.
If some of your car parts are damaged and you wish to buy brand new ones, then you must visit our aftermarket store-  We promise to provide you with the best quality of auto parts and other tools and accessories at economic prices.

Friday, May 5, 2017

Don't want to visit a mechanic for changing car oil? Don't worry!! You can change it on your own.

DIY -Steps to change your Car Oil
Car repairs are tough and everyone cannot do it on their own. But all of us can do some routine maintenance as they are perfectly easy. Changing your car oil is one of the easiest things which you can do all by yourself. It would save a lot of your money and at the same time would make you feel independent by repairing your car parts.  So let’s see how you can do it.

The mechanics would generally say that changing car oil is extremely easy, but the regular people like us would still feel hesitant as we are not so much confident about it. In reality it is really very easy to change your car oil and you do not require much car maintenance skills. A little bit of supervision is needed for the first time.
Collect the basic information about your car
Before you start doing, you need some information first. You will have to buy oil and a new oil filter. Before buying any specific type of oil and filters, note down the following information about your car:
  • Year
  • Make
  • Model
  • Engine displacement size
  • Oil type
Refer to your car manual as it would have most of the above mentioned information. There may be a sticker inside your car, which would tell you that what type of oil you would need. Once all the information is collected, then you can go to any store which sells auto parts. You can also look up at stores like Napa Canada or partsonline if required. Buy enough quantity of oil so that you can fill your car properly.
When it comes to oil filter, it can cause some problem. The main reason behind this is that there is no standardized part naming scheme for oil filters. Once you have the above mentioned information, then you can easily look up at the type of filter which you need.
Step 1- Grab all the tools
Before you start changing your oil, make sure that you have all these tools
  • Car jack
  • Socket wrench
  • Towel or a blanket
  • Oil
  • Oil filter
  • Funnel
Once you have all the necessary tools, and then run your car for a minute or two so that the oil in your car warms up a little bit. When you put it up on the jack, at that time the car should be off. The only benefit of turning the car ON previously is that it would help the oil to flow out easier.
Lift your car up with the help of a jack and then you can safely work underneath it. It is essential to use a jack or else your car can fall on top of you.
Step 2- Drain the Oil
Then the thing which should be done is draining your oil. You can gently place the oil pan beneath the plug. You should locate the drain plug. If you are unable to do so, then you can always refer to your car’s manual. The oil drain pan should be totally underneath the plug so that it can catch all the oil which would come out from your car.
Wear rubber gloves before you continue. The oil inside your car would be very hot, so kindly use a wrench to loosen the plug. Remove the drain plug as quickly as you can. Let your vehicle empty entirely. Replace the plug and then you can move on to the next step.
Step 3- Replace the Oil Filter
The next step is to replace the oil filter. Some more amount of oil would come out of your vehicle, so the oil pan should be under your oil filter. There are different types of oil filters. Unscrew the old oil filter and then loosen the plastic cover. Remove the old filter. Wait for some time and let it drain completely. Use a paper towel to wipe off the opening. Replace the filter with a new one and then tighten the seal.
Step 4- Refill your Oil
Once everything is sealed properly, then refill the oil. Refer to your car’s manual and then fill the oil accordingly. To refill your oil, you will have to first remove the oil cap from the top. Then gently place the funnel inside the hole. Pour the oil into the funnel and then replace the cap and tighten it.
Then you can take the car off the jacks and turn the car engine on. Give it some time and let it run a bit so that the oil can run through the system. Turn your car off after a few minutes and then you can check your dipstick. The level of oil should be between the two dots.
Step5 - Dispose of the Oil
It is illegal to dump car oil in an unapproved area. You can give your oil to the auto parts stores and other gas stations as they would dispose the oil on your behalf.
You can also visit online car part stores to find oil filter you need. You can order best quality of auto parts from So now once you have the correct oil and filter, then you are totally ready to get dirty.

Friday, March 24, 2017

Is your rear bumper too old and disfigured? Willing to buy a fresh new one? Parts avatar is here at your service.

Rear Bumpers can be replaced easily at Home
Rear bumpers are present at the back of your car and it protects it by absorbing energy if your car bumps into something. You know the most dangerous thing when you are driving on road? The answer to this is other drivers on road who are around you. No one is willing to hear that crunching sound when another vehicle collapses into yours. This car part is located at the back and would absorb the strain caused by the collision. All the damage would be done to the rear bumper. If any such miss happening occurs, then you should buy extra rear bumper parts and can replace them yourself as not much mechanical knowledge is required for this task.
 Replacing Car’s Rear Bumper
This is really very easy task and not much knowledge is essential to perform it. Things which you would need for this are:-
  • Spanner
  • Screwdriver
  • A person to assist you

  1. Work with the car boot
Firstly open the boot of your car and then hold the bumper. There would be many small screws, unscrew them carefully with the help of a screwdriver. Use a spanner or a wrench to take off all the bolts.

  1. Under your car
Then you have to open up the remaining screws. It would be very easy to locate them and then you must remove them all. Then you can slide under your car and can pull off the bumper from your car. Don’t forget to keep all the screws and bolts at a safe place because you will need them in later on.

  1. Take some  help from your friend
In this third step, you will require a friend or an assistant to help you out. You should open the car and ask your friend to hold the bumper at the place which lies against the rear of the car. Then use the wrench so that you can attach the bumper at its original place. Screw the plastic trim as well.

  1. Final step
Finally put the screws back at their original place. Reattach the bumper very carefully to its body. Check whether all the screws and fixings are properly tighten up or not. It you find that there is any sort of movement, and then you must check the nearest screws and tighten them more.
Now you have successfully replaced your car’s bumper. Isn’t it easy? Indeed it is!
You must know something about these rear bumper parts:-

  • Rear bumper bracket
Bumpers act as protectors when collisions occur. When any mid collision occurs, there are dents left on the bumpers. But if your vehicle gets mild hit and the bumper slumps, it indicates that there is a need of new bumper bracket to support it. It is very easy to change a bumper bracket and you can easily do it yourself.  You can visit Napa Canada if you wish to buy one.

  • Rear Bumper End
This is nothing, but an additional bumper. Whosoever sees it for the first time thinks of it as a small panel that would complete the overall look of their car rear. But it is actually something more than this. Yes it provides sleek look to your car, but this auto component also provides some protection against small impacts. You must keep this point in mind if you are thinking of purchasing one.

A lot of people consider this part for granted, but in reality this piece of plastic performs a great job in protecting your vehicle from the impact of accidents. Moreover it helps you to save money on bumper repair as it keeps the shape of your bumper cover intact. You should avoid the damage which can be caused form small parking accident and you must replace your damaged and old bumper absorber to a new one.

  • Rear bumper moulding
These are the pads which are designed for the trunk area so that one can sit on top of the bumper, here it will provide the protection from the damage.

  • Rear bumper rebar
It is also known as rear bumper reinforcement bar. This rebar is situated under the plastic bumper. This is the main component of the bumper that would absorb impact. It protects the main car parts like the lights, fenders and many other valuable parts.

It acts as a protective accessory which is there on your rear bumper. There are lot of damage causing elements that would enter your vehicle like dust or mud. This component provides protection to your car against all these elements.

Accidents can happen anywhere and at any time. You must be cautious enough or else a lot of damage can happen to your rear bumper from someone at your back. But you should not get tensed as at you will get everything which you need and at equitable prices. You must visit us and we promise that you will never regret your decision.